Above Ground room sized upto 15m3

3.0kw Slimline System - Perfect for smaller rooms; quiet, compact and reliable

  • Price
    £ 1,795 + VAT
  • Type
  • KW @ 12.5 c
  • Manufacturer
    VOLLAND Ltd*
  • Below Ground Size
    15 M3
  • Power Supply
    13amp Fused Spur
The System

Our own "SlimLine" Cellar Cooling is smaller and quieter than standard cellar cooling systems. It incorporates a small twin fan evaporator to take up minimal space in a small room, and the smaller indoor unit is silent, perfect for micropubs or residential where the ambience is important, and you don't want a "hum" in the background. The indoor unit has a digital controller where you can monitor and control the room temperature

  • Digital controller to monitor and control the room temperature
  • Quiet & Unobtrusive Outdoor Unit
  • Silent & Compact Indoor Unit
  • 3 Year Manufacturers Guarantee
The Install

Installs are carried out on a day that suits your business and completed on the same day. Timescales depend on site and install conditions, but normally installs are complete within 6 hours.

Your install will be carried out by 2 competent, qualified and experienced engineers; we take pride in our installs, ensuring tidy work and best practice when installing and commissioning. In line with UK regulations all engineers onsite will be City & Guilds 2079 trained, and the company is REFCOM registered to enable us to carry out your install

The price on this page for this system includes the installation of the system with further details below. If your install falls outside of the following details, please use out quote form to receive a quick tailor-made quote

  • Decommissioning and removal of existing system
  • Mounting the evaporator and condenser
  • Placing the pipework, insulation and wiring upto a 7m run. The indicated price allows for the drilling through a single brick/ stone wall (65mm hole up to 500mm deep).
  • Connecting the system to an electrical supply (within 2 meters of the indoor unit)
  • Placing the waste pipe to suitable location (within 2 meters of the indoor unit)
  • There may be a surcharge of up to £395.00 for some parts of London, Cornwall, Devon, Wales & Scotland; please contact for more info, or look at the out of area surcharge page under "Price List".

When replacing an existing system we may opt to reuse your existing pipe run if it is suitable, or we are unable to replace due to the pipework location. Existing pipework will be flushed with a cleaning agent at no additional cost.

What is required onsite

A power supply will be required in the room where the indoor system is to be placed; we recommend a 13amp Fused Spur backed up by a suitable 'c' rated breaker. This service is not provided by VOLLAND Ltd, but can be carried out by your local electrician. If we are replacing an existing system, we can reutilise the existing supply, but it is your responsibility to seek qualified advice to confirm that it is suitable for this system and conforms to current BS 7671 standards.


The evaporator (indoor unit) produces condensate and will require access to a drainage point. This drainage point can either be to the outdoors (if the room is above ground and on an external wall), to a drain or a container. The system price includes overflow pipe to a drain point up to 2m from the evaporator.

Access to the premesies

Parking is required either onsite or close to the premises with any local parking charges covered in the install cost up to £5. If special arrangements are required to enable us to park onsite, then this should be arranged by yourself prior to install. If no parking is on site, there may be further changes to account for additional costs involved in the logistics of the install without parking.

Congestion Charges

London Congestion Charges are covered in full by the London surcharge. All other Congestion Charges outside of London will be covered upto the cost of £5.